Place 2 closed rings on an open ring and close the ring. Add another ring in the same place to make 2 links, each with 2 rings.

The next photos show the steps with different colored rings to make the pattern very clear. Twist a piece of scrap wire around both rings of the left hand link. Fold black the 2 rings from the right hand link (shown in gold), one on each side of the 1st link. Part the 2 rings from the first link (shown in silver) and with an open ring go through both of the folded back gold rings, close the ring. Add another ring in the same place.

Add another 2 ringed link and fold these 2 rings back, exactly the same as in step 2. Part the 2 rings that enclose the folded back rings (shown in silver), take an open ring and go through both of the folded back rings, close the ring. Add another ring in the same place.

Place an aquilene crystal on a large 3/16" ring, add a small 1/8" ring so it sits at the front of the crystal. Attach this large ring to the last box of the chain maille piece in between the 2 hanging rings.

To make the ear wire take a piece of 20g wire about 2" long. Make a loop in one end. Shape the wire around the mandrel and shape the tail end how you like. Smooth the end and work harden with a hammer or tumbler. Attach the ear wire to the small 1/8" ring.