Judy Larson's Bracelet Component, Metalwork. Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing. .
Bracelet Component
by Judy Larson
  • Category: Metalwork
  • Technique(s): Cutting, Dapping, Filing / Finishing, Hole Punching, Riveting, Texturing
  • Skill Level: Beginner

Materials

24 Gauge 0.020 Dead Soft Copper Sheet Metal - 6x6 Inch
MET-705.24
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $6.93
  • Gold Club Price: $5.20
Add to Bag
12mm Copper Rivet - Pack of 25
A5-512
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $1.99
  • Gold Club Price: $1.49
Add to Bag
Add All Items to Cart

Tools

Liver of Sulphur Gel, 2 Ounce Bottle
SOL-610.02
  • SOL-610.02
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $12.97
  • Gold Club Price: $9.73
Add to Bag
Pro Shear
SHR-544.00
  • SHR-544.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $12.95
  • Gold Club Price: $9.71
Add to Bag
7 Piece Mini TruStrike Hammer Set with Stand
HAM-520.70
  • HAM-520.70
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $175.67
  • Gold Club Price: $131.75
Add to Bag
Riveting Hammer
HAM-200.00
  • HAM-200.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $24.97
  • Gold Club Price: $18.73
Add to Bag
Bench Block Helper with Steel and Nylon Blocks
DAP-500.30
  • DAP-500.30
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $28.95
  • Gold Club Price: $21.71
Add to Bag
Euro Punch Plier 1.50mm
PLR-133.70
  • PLR-133.70
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
Nylon Bracelet Bending Plier
PLR-840.00
  • PLR-840.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $19.97
  • Gold Club Price: $14.98
Out of Stock
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
  • PLR-487.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
6 Piece Assorted File Set with Wooden Handle
G14-7
  • G14-7
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $5.57
  • Gold Club Price: $4.18
Add to Bag
Marker -extra fine
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
Add All Items to Cart
Instructions
Step 1
Copy the long oval, large circle and one small circle templates.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Template
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Template
Step 2
Transfer the designs to your sheet metal.
Step 3
Cut the pieces out using your preferred method for cutting sheet metal.
Step 4
File any sharp edges.
Step 5
Use a 1.5mm hole punch to make holes in the center of each circle and on both ends of the bracelet backplate.
Pro Tip: Note: Step 6 and 7 are optional. If you do not own or have access to a Sizzix Big Shot Embossing Machine, texture the tab pendant backplate in any manner you wish.
Step 6
Anneal the bracelet backplate and then pickle to remove fire scale.
Step 7
Place the bracelet backplate on the DecoEtch plate. Run it through the Sizzix Big Shot Embossing Machine to achieve the background texture.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Textured copper bracelet component
Step 8
Use the Mini TruStrike Designer/Texture Hammer to texture the edges of the large circle. Use the Mini TruStrike Embossing Hammer to texture the smaller circle. Try to make slightly wavy edges when you are texturing.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Using Mini TruStrike Designer/Texture Hammer to texture
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Using Mini TruStrike Embossing Hammer to texture
Step 9
Use the Dapping Punch Set to cup the circles. To preserve the texture when cupping each circle, consider placing a piece of felt between the dap and the circle shape.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Using Dapping Punch Set
Step 10
Position the large domed piece on the bracelet backplate. Using an ultra fine point permanent marker, mark where the rivet hole needs to be punched. Use a 1.5mm metal hole punch to make the hole.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Riveting parts
Step 11
Rivet the stacked cupped flower pieces to the bracelet backplate.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Assymbled parts
Step 12
Use the bracelet bending pliers to curve the bracelet backplate.
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Using bracelet bending pliers
Step 13
You can leave your piece bright and shiny or use liver of sulfur to patina it. Buff with 0000 steel wool to bring out the dimension of your texturing.
Congratulations! You've made your first Bracelet Component!
Judy Larson's Bracelet Component - , Metalwork, Cutting, Cutting Tool, Cutters, Dapping, Dapping Jewelry, Filing, Finishing, How To Punch Holes, Hole Punching, Punch A Hole, Riveting, Riveting Techniques, Wire Rivets, Texturing, Finished bracelet component