Using the pin vise and flat nose pliers, twist the two sterling silver wires.

Lay the twisted silver wires between the gold wires, using quilters tape to stabilize. Place one wrap in the center of the wire bundle using gold half-round wire.

Begin to bend the wire bundle in a lazy "U" with the wrap slightly off center to the right. To the left side of the first wrap, add a second wire wrap approximately ¾" from the first so that the two wraps are in the 4 and 8 o'clock positions. Add a third wrap on the left side about 1 to 1¼" from the last wrap and begin to free form and sculpt the bail utilizing a mandrel.

Choose eleven 4mm Swarovski bi-cones in one or two colors. When adding the crystals to your pendant, use your artistic eye to place the four wires in an aesthetic fashion.

Place one bi-cone on the innermost gold wire and secure the wire to the left side of pendant frame.

Add two more bi-cones to the next silver wire, securing it to the frame.

Add three more bi-cones to the next silver wire, once again securing it to the frame.

Add five bi-cones to the last gold wire and secure it to the frame.

Check all your wire connections to be certain they are smoothly wrapped and will not scratch the wearer or catch delicate fabric. Enjoy your pendant!!