Judy Freyer Thompson's Making Basic End Cones, Findings & Components, Toggles & Clasps, Earwire & Headpin. Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets. Need a cone to finish off a necklace or bracelet? Don't have one in your stock? Grab some copper, a rivet and you are on your way to making your own cone; best part is they are easy, quick and make use of small pieces.
Making Basic End Cones
by Judy Freyer Thompson
  • Category: Findings
  • Technique(s): Cutting, Hole Punching, Making Findings, Riveting
  • Skill Level: Intermediate
Need a cone to finish off a necklace or bracelet? Don't have one in your stock? Grab some copper, a rivet and you are on your way to making your own cone; best part is they are easy, quick and make use of small pieces. If you a lucky enough to have a bench vise with a horn, you can use that to set the rivet in the cone. If not, clamp a 6mm steel mandrel in a bench vise to serve as a horn.

Materials

24 Gauge 0.020 Dead Soft Copper Sheet Metal - 6x12 Inch
MET-705.24M
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $8.66
  • Gold Club Price: $6.50
Add to Bag
12mm Copper Rivet - Pack of 25
A5-512
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 pieces
  • Price: $1.99
  • Gold Club Price: $1.49
Add to Bag
Add All Items to Cart

Tools

Ultimate wire-pliers Set
G15-20
  • G15-20
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $99.95
  • Gold Club Price: $74.96
Add to Bag
Pocket Diamond Needle File Set--5 Piece
FIL-673.00
  • FIL-673.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $25.97
  • Gold Club Price: $19.48
Add to Bag
Blazer Big Buddy Turbo Torch, Black
TRCH-8010
  • TRCH-8010
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $40.00
  • Gold Club Price: $30.00
Out of Stock
7 Rotating Annealing Pan with Pumice
SOL-520.00
  • SOL-520.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $29.95
  • Gold Club Price: $22.46
Out of Stock
Euro Tool Metal Hole Punch Pliers, 1.8 Millimeters
PLR-133.50
  • PLR-133.50
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
Chasing Hammer with Wooden Handle, 1 1/8 Inch Face
G3-27
  • G3-27
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $13.97
  • Gold Club Price: $10.48
Add to Bag
V-Slot Bench Pin
BPN-105.10
  • BPN-105.10
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $5.97
  • Gold Club Price: $4.48
Add to Bag
24 Piece Dapping Punch Set
DAP-705.00
  • DAP-705.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $85.97
  • Gold Club Price: $64.48
Add to Bag
1 1/2 Inch Mini Fixed Table Vise
G10-20
  • G10-20
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $9.27
  • Gold Club Price: $6.95
Add to Bag
Lindstrom Multi-Purpose Shear, 5-3/4 Inches
G2-6000
  • G2-6000
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $34.97
  • Gold Club Price: $26.23
Add to Bag
Add All Items to Cart
Instructions
Step 1
Draw or print the template as shown. Transfer the template to the copper sheet using the permanent marker.

Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, draw the template
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, trace the template
Step 2
Using the Lindstrom multi-purpose shears, cut out the shape.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, cut out the shape
Step 3
Rest the shape on the bench pin and file the edges smooth using a flat needle file.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, file the edges
Step 4
Anneal the cone shape and let it cool. Pickle to remove the fire scale if desired. Using the round nose pliers, position the piece as shown.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, position the piece in the pliers
Step 5
Begin to bend the piece, repositioning the pliers as necessary to complete the cone shape.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, bend the metal around the pliers
Step 6
Using the punch pliers, punch a rivet hole as shown.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, punch a hole
Step 7
Tighten the 4 mm punch in the bench vise. Install the rivet from the inside of the cone and slide on the mandrel making to sure the rivet head is tight against the dap.

Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, insert a rivet
Step 8
Trim the rivet shank to approximately 1/16" using the flush cutters.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, trim the rivet
Step 9
Set the rivet using the ball end of the chasing hammer.
Judy Freyer Thompson's Making Basic End Cones - , Findings & Components, Toggles & Clasps, Earwire & Headpin, Cutting, Cutting Tool, Cutters, How To Punch Holes, Hole Punching, Punch A Hole, Findings, Clasps, Components, Riveting, Riveting Techniques, Wire Rivets, set the rivet