Home / Jewelry Making Patterns / Mother of Pearl Disc Link Bracelet
Dale Armstrong's Mother of Pearl Disc Link Bracelet, Contemporary Wire Jewelry. Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry. When the new order of large-holed, freshwater pearls arrived at the wirejewelry warehouse, we couldn't wait to make some new designs with them.
Mother of Pearl Disc Link Bracelet
by Dale Armstrong
  • Category: Contemporary
  • Technique(s): Making Findings, Making Loops, Wrapping
  • Skill Level: Beginner
When the new order of large-holed, freshwater pearls arrived at the wirejewelry warehouse, we couldn't wait to make some new designs with them. The 14x5mm MOP disc beads are a pretty mix of soft peach and rose tones that look great in gold, and the 5mm round white pearls look nice in silver, so our bracelet was made in a gold/silver combination. Individual links can also be made into earrings, and a longer length of combined links would make a lovely necklace.

Materials

20 Gauge Half Round Half Hard 14/20 Gold Filled Wire
H4-20HRH
  • Lesson Quantity: 20.00 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $17.61
  • Gold Club Price: $13.21
Add to Bag
21 Gauge Round Half Hard .925 Sterling Silver Wire
H8-21H
  • Lesson Quantity: 12.50 inches
  • Purchase Quantity: 1.00 5FT
  • Price: $10.75
  • Gold Club Price: $8.06
Add to Bag
6.22X11.81mm Gold Finish Brass Lobster Claw - Pack Of 1
LR4-302
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $1.60
  • Gold Club Price: $1.20
Add to Bag
Oval Pink Shell Beads 10x15mm
  • Lesson Quantity: 5.00 pieces
  • Purchase Quantity: 1.00 each
5-5.5mm Large Hole (1.2mm) White Potato Fresh Water Pearls - Pack of 20
A8-05
  • Lesson Quantity: 5.00 pieces
  • Purchase Quantity: 1.00 pieces
  • Price: $6.57
  • Gold Club Price: $4.93
Add to Bag
Add All Items to Cart

Tools

Chain Nose Wire Plier
G2-508
  • G2-508
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
Flat Nose Wire Plier
G2-506
  • G2-506
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $32.95
  • Gold Club Price: $24.71
Add to Bag
4.5 Inch Needle Nose Ergonomic Mini Plier - Pack of 1
G2-151
  • G2-151
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $6.97
  • Gold Club Price: $5.23
Add to Bag
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
  • PLR-487.00
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $14.97
  • Gold Club Price: $11.23
Add to Bag
12 Inch Stainless Steel Ruler
G7-30
  • G7-30
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
  • Price: $2.97
  • Gold Club Price: $2.23
Add to Bag
Marker -extra fine
  • Lesson Quantity: 1.00 pieces
  • Purchase Quantity: 1.00 each
Add All Items to Cart
Instructions
Step 1
For each disc-link, straighten, measure, and cut one 4" piece of 20g wire; and for each pearl link, prepare one 2-½" 21g wire.
Step 2
Beginning with a disc link, place flat-nose pliers on a 4" wire at a 1⅝" measurement and make a 90° angle.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Bending wire with flat nose pliers.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Bending wire with flat nose pliers.
Step 3
Place round-nose pliers on the shorter wire of the angle just made and form a wrapped loop, using the shorter wire to do so, wrapping it down two times and stop, do not cut this wire. Add one 14x10mm disc bead.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Forming wrapped loop with round nose pliers.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Forming wrapped loop with round nose pliers.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Forming wrapped loop with round nose pliers.
Step 4
Place chain-nose pliers on the wire immediately after the disc bead and hold it while using fingers to bend the wire over the pliers' jaw at a 90° angle, to the opposite side of the first.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Bending wire around the disc bead with chain nose pliers.
Step 5
Use round nose pliers on the shorter end of the angle just made to form another wrapped loop, wrapping down twice and ending on the opposite side from the first end. Do not cut this wire.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Forming wrapped loop with round nose pliers.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Forming wrapped loop with round nose pliers.
Step 6
Use needle-nose, chain-nose pliers to begin a tiny, tight spiral at the end of one of the wrap wires, and flat-nose pliers to roll the spiral diagonally up and across the disc, ending just under the wrapped loop. Repeat on the other side.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Making small tight spiral with needle nose pliers.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Making small tight spiral with needle nose pliers.
Step 7
View the newly wrapped disc bead from the side and use flat-nose pliers to align both loops, finishing the disc-link.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Aligning loops with flat nose pliers.
Step 8
On a 2-½" piece of 21g wire, use flat-nose pliers at a 1" measurement to make a 90° angle.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Measuring 21-gauge wire.
Step 9
Use round-nose pliers on the short wire of the angle just made and form a loop. Insert this loop into one looped end of the disc-link and use needle-nose, chain-nose pliers to hold the loop while wrapping it in, 3 times to show and trim, attaching it to the disc-link.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Forming loop with round nose pliers.
Step 10
Thread a 5mm pearl onto this wire. Use chain-nose pliers to hold a space on the wire immediately after the pearl, while using fingers to bend the wire over the pliers' jaw at a 90° angle.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Threaded pearl.
Step 11
Use round-nose pliers to make a loop and before wrapping it in, insert the loop through another disc-link. (Remember to place the same-spiraled end of this disc-link as the first one.) Wrap the loop in 3 times to show and trim. Now there are 3 links running together, a disc, a pearl and another disc. Continue making and linking until the bracelet is 1" shy of the desired finished length. To finish the bracelet, while making the last pearl link use a large section of round-nose pliers to make the very last loop, which becomes the eye. Attach a 10mm trigger clasp onto a disc-link on the opposite end.
Dale Armstrong's Mother of Pearl Disc Link Bracelet - , Contemporary Wire Jewelry, Findings, Clasps, Components, Loops, Wire Loop, Wrapped Wire Loop, Wire Wrapping, Wrapping, Wire Wrapping Jewelry, Round nose pliers making a loop and wrapping.

Reviews

Login to post a Review
Login to be the first to review this Pattern!