20 Gauge Half Round Half Hard 14/20 Gold Filled Wire
H4-20HRH
Lesson Quantity: 24.00 inches
Purchase Quantity: 1.00 5FT
Price: $17.61
Gold Club Price: $13.21
Add to Bag
20 Gauge Square Half Hard 14/20 Gold Filled Wire
H4-20SQH
Lesson Quantity: 54.00 inches
Purchase Quantity: 3.00 25FT
Price: $193.71
Gold Club Price: $145.28
Add to Bag
5mm Gold Filled Round 6 Prong Snapset for Faceted Gemstone - Pack of 2
J2-6
Lesson Quantity: 6.00 pieces
Purchase Quantity: 3.00 each
Price: $3.97
Gold Club Price: $2.98
Add to Bag
5mm Round Peridot CZ - Pack of 5
E5-15I
Lesson Quantity: 6.00 pieces
Purchase Quantity: 2.00 each
Price: $2.57
Gold Club Price: $1.93
Add to Bag
10x5mm Marquise Alexandrite CZ - Pack of 2
E5-710A
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $8.97
Gold Club Price: $6.73
Add to Bag
Add All Items to Cart
Tools
3.6 Volt Automatic Wire Twister (Cordless Screwdriver)
G5-15
G5-15
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $42.97
Gold Club Price: $32.23
Add to Bag
C.H.P Milano Italian Flush Cutter, 5 1/2 Inches
PLR-487.00
PLR-487.00
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $14.97
Gold Club Price: $11.23
Add to Bag
6 1/2 Inch Bail Making Pliers
G2-18
G2-18
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $15.97
Gold Club Price: $11.98
Add to Bag
Chain Nose Wire Plier
G2-508
G2-508
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $32.95
Gold Club Price: $24.71
Add to Bag
Flat Nose Wire Plier
G2-506
G2-506
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $32.95
Gold Club Price: $24.71
Add to Bag
Round Nose Wire Plier
G2-507
G2-507
Lesson Quantity: 1.00 pieces
Purchase Quantity: 1.00 each
Price: $32.95
Gold Club Price: $24.71
Add to Bag
Add All Items to Cart
Instructions
Step 1
With your wire twister twist the 8 pieces of 20 gauge wire, the 2 pieces of 5” wire.
Step 2
With your bail pliers make a make a figure 8 out of each 3” piece of wire. At the end of each figure 8, curl the cut end under. This will form an “S” from your figure 8.
Step 3
Layout the 8 “S” shaped wires opposite each other to form a heart. You should have 4 hearts. 2 wires for each heart.
Step 4
Cut a 3” piece of half round wire and wrap the two “S” pieces of wire together to secure the heart shape. Do that to all 4 hearts.
Step 5
Take 2 of the hearts and put one on top of the other and secure them with half round wire.
Step 6
Connect all 4 pieces together with half round wire.
Step 7
Take the two 5” pieces and twist them
Step 8
Take one of the pieces and with your round nose pliers place the pliers in the middle of the wire and wrap it around the round nose forming a V.
Step 9
With your bail pliers bend the wire around them to form a hump about an inch up from the small loop in the middle of the wire. Do this to both sides to form a heart. Cut the wires and close the heart with the half round wire.
Step 10
Attach the heart upside down to the top of your piece. The small loop will form the bail where you will slip a small jump ring to hang chains with.
Step 11
Snap the gemstones into the settings and with the round wire weave the settings onto your pendant. You can choose smaller gemstones and place more of them on the piece. It is your design.
Step 12
Bundle the 5 pieces of 4” wire with half hard half round wire. Wrap about a half inch in the middle of the wires.
Step 13
With your flat nose pliers bend the wire at a 90 degree angle in the middle of the wrapped wires.
Step 14
Take your bundled wire and slip the stone in the middle where the bend is
Step 15
Take the outside wires and bend them over the stone forming an X. This should secure the stone in the setting. Cut the wires down to form prongs to hold your stone in place.
Step 16
With the remaining wires fasten the gemstone to your piece. Where the upside down heart is. With the excess wire, form loops over the gemstone to secure it in place.
Step 17
With you last 5” wire bend the wire around the bail pliers at the halfway point. Take each end and form spirals. Attach to the bottom of your piece with half round wire.
Step 18
Tumble your piece or polish and clean it.
Supply Detail
loading...
Change Metal:
This Pattern requires:
Purchase quantity:
Price: $
Gold Club Price: $