If you want to make your own wire jewelry findings (and why not?) you’ll need a few additional tools.

Wire Hammer A nylon wire hammer is very useful for flattening wire without marring the surface. Hammering your finished wire components is also a good way to work-harden them and prevent them from losing their shape.

Small Anvil or Steel Bench Block These tools provide a firm surface for hammering and work-hardening your wire jewelry findings and components. You can also find bench blocks made of nylon and with a rubber base for absorbing shock and noise.

Mandrels A mandrel is used for making consistent, evenly-sized loops in your wire that you can nip off into perfect jump rings. If you don’t want to purchase a wire jewelry making mandrel, you can just use a smooth knitting needle, pencil, or wooden dowel.

Wire comes in different gauges, or thicknesses, which are noted as numbers. When figuring out wire thickness, a smaller number is assigned to a thicker wire. A 16 gauge wire will be much thicker than a 28 gauge wire.

Wire also comes in different hardness. This refers to the ease with which the wire can be shaped and its ability to retain this shape under stress.

A dead-soft wire is easily bent with your fingers and can be manipulated after shaping.

A full-hard wire usually requires the help of jewelry making pliers and will retain its shape under stress. You can always work-harden your wire components and findings by tumbling them after you’ve finished them.

Wire comes in three basic shapes: round, half-round and square. You can tell which shape of wire you are using by looking at a cross-section of wire. A round wire will look like a circle. Half-round will resemble a half moon. And square wire will resemble a square.

You can also find twisted wire that has lovely little grooves worked into it as well as patterned wire with floral and geometric patterns.

1. Practice on craft wire. Perfect your wire jewelry-making techniques and skills by using low-cost aluminum or brass craft wire. Craft wire comes in a wide variety of colors and sizes and costs much less than precious metal wire.

2. Choose box joint pliers. Box joints maintain the alignment of the pliers’ jaws, even under stress.

3. Work directly from the spool. When using precious metal wire (after you’ve practiced on craft wire), work right off the spool of wire to avoid wasting any.

4. Protect your eyes. When snipping wire, hold your non-dominant hand over the blades to keep small pieces from flying toward your face.

5. Keep that sterling silver wire shining! Silver tarnishes from humidity in the air. To help keep your silver from tarnishing, keep your wire in plastic bags and add a small silica/desiccant package that often comes with new shoes and handbags.

6. Prevent nicks in your wire jewelry findings. To prevent nicks and mars on your wire, cover your metal-jawed pliers with bandage tape or dip them into a protective liquid plastic.

7. Use the right tool for the job. Don’t use your regular wire cutters for cutting memory wire. Because memory wire is so hard, you’ll want to invest in a pair of special heavy-weight cutters just for your memory wire projects.

Now that you have the basics, are you ready to get started? You can find a complete “Ultimate Tool List” in our Resource Center. Many of the tools we talked about are listed here.